Uploading your files with CuteFTP
Posted by Salman U on 29 May 2004 04:16 PM
This explains how to setup FTP to upload your files from your computer to your website. In this section we will show you how to connect using CuteFTP. Other FTP programs can be used and will follow similar steps as are shown below. We offer instructions specifically for configuring CuteFTP (non-pro) below.
Important: If you are using any FTP Program, be sure you are uploading to the correct directory and that your home page is called index.html. Otherwise, you won't be able to view your pages after you upload them. If you can go "up" a directory when you log in using FTP, go up as far as you can and then into the /web folder.
-Correct Directory to Upload: /www/ or /public_html/
-Correct Home Page Name: index.html or index.htm (if index.html has been deleted)
-Correct Host Name: xyz.com or your IP address
-Remote Host Directory: /www
The following information is contained within your account activation notice and is needed to connect you to your website via FTP:
Your User Name........(case sensitive)
Your Password..........(case sensitive)
Your Host Address.... yourdomain.com or your IP address
("IP address" is the numerical address assigned to every account. For the first few days, until your domain name is registered or transferred, this will be the only way you can connect).
Please note that there are a number of older and current versions of Cute FTP floating around. As a result, some of the instructions provided here cannot possibly reflect all the versions, which have been released in the past 5 years. The only small difference you may encounter is where some of the options can be found (depending on the client version you're using). In any event, everything is pretty well much the same. Let's get started:
1. When CuteFTP is loaded the first time, the a window will appear. If the window doesn't appear, press the F4 function key or select File -> Site Manager.
2. Click on General FTP Sites and then click on "New"
3. Add the following to the FTP Site Edit window
Once your in, upload to the directory called WWW or public_html.
HINT: If you're behind a firewall, router or sharing systems (NAT) make sure "Passive Mode" is enabled in CuteFTP! Not doing so will cause you trouble accessing your site via FTP!